10 Steps for Changing an Element

 

1. Turn off and Unplug the tank
   
   
2. Remove the control box cover
   
   
3. Undo the nuts connecting the wires to the element terminals
   
   
4. Undo the two element securing plate nuts
   
   
5. Slide the old element out
   
   
6. Slide the new element into the slot
   
   
7. Replace the element securing plate and tighten the nuts ensuring that the plate is not touching either of the element terminals
   
   
8. Connect the wires to the element terminals and secure. It does not matter which way round they go
   
   
9. Plug the tank in and check the pilot light is operating
   
   
10. Turn off the tank and secure the control box cover

 An Instructional Video is available at http://youtu.be/aQSjPQx8Ao4

If you have any questions or problems- call Richard on 021 025 65154 anytime